I noted recently that water has been getting in the engine bay due to poorly fitted deck signs. The holes drilled for the brass signs were not sealed and the screws not secured via bolts. As the boat safety is 4 yrs away I have removed the signs and filled the holes - hopefully the engine bay should now be dry - the deck drains naturally down the hatch channels.
I am going to leave the required repairs until next year now -soft engine mount, stern gland repacking and alternator low output problems to be sorted - expensive time at the moment with house repairs and daughter at uni.
Radio and tv now removed from boat for winter - will move upholstery soon and drain off water. Also need to put antifreeze in engine - pure water at the moment due to the previously reported leaking radiator cap problem - now sorted.
I am going to leave the required repairs until next year now -soft engine mount, stern gland repacking and alternator low output problems to be sorted - expensive time at the moment with house repairs and daughter at uni.
Radio and tv now removed from boat for winter - will move upholstery soon and drain off water. Also need to put antifreeze in engine - pure water at the moment due to the previously reported leaking radiator cap problem - now sorted.
No comments:
Post a Comment